View AP10F070039B_7961814.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

page 1 of 11 ap.10f.07.0039b specifcation part no. ap.10f.07.0039b product name 2 stage 25db 10mm active ceramic patch antenna 39mm 0.81 micro coax with ipex mhfi (u.fl compatible) with front end saw filter feature small form factor gps active patch 10mm*10mm*4mm, wide voltage 1.8v~5.5v 25db lna high performance ultra low power consumption rohs compliant spe-12-8-004/b/ss |
page 2 of 11 the ap.10f active gps patch antenna is the smallest gps high performance antenna currently available in the world. it uses an extremely sensitive high dielectric constant powder formulation and tight process control and patented circular po - larized side stripe design the 10*10*4mm patch antenna. the front end saw flter reduces the risks where there is a cellular transmitter nearby of interference from out of band frequencies which can cause lna burn-out, saturation, or radiated spurious emissions. this product is suited to small form factor mobile devices such as gps smartphones, personal location, medical devices, tele - matic devices and automotive navigation and tracking. custom gain, connector and cable versions are available. custom tuning is available for specifc customer device environments and is dependent on a minimum order quantity and nre in some cases. please contact sales@taoglas.com for details. 1. introduction antenna saw filter lna*2 i-pex + cable the ap.10e consists of 2 functional blocks C the lna and also the patch antenna. spe-12-8-004/b/ss |
page 3 of 11 2. specifcation 2.1 patch antenna 2.2 lna parameter specifcation frequency 1575.42 1.023mhz gain @ zenith -10dbic typ. @ zenith polarization rhcp axial ratio 4.0db max @ zenith patch dimension 10*10*4.0mm parameter specifcation frequency 1575.42 1.023mhz outer band attenuation f0=1575.42mhz f030mhz 5db min. f050mhz 20db min. f0100mhz 25db min. output impedance 50 output vswr 2.0 max pout at 1db gain compression point typ. 11 dbm min. 8 dbm lna gain, power consumption and noise figure voltage lna gain (typ) power consumption(ma) typ noise figure typ min. 1.8v 20db 5ma 2.7db typ. 3.0v 25db 10ma 2.5db max. 5.5v 25db 23ma 2.7db parameter specifcation rf cable coaxial cable ? 0.81 0.1mm, length 39 2.0mm connector ipex mhfi (u.fl) 2.3 cable* & connector spe-12-8-004/b/ss |
page 4 of 11 3. lna gain and out band rejection @3.0v 6 1 tr1 s21 log mag 10.00db/ ref -40.00db (f2) 1 center 1.57542 ghz span 400 mhz 13/20 cor ifbw 70 khz cg1 tr1 s21 > 1 1.5754200 ghz 26.079 db cg1 tr1 s21 2 1.6054200 ghz -18.867 db cg1 tr1 s21 3 1.5454200 ghz 19.068 db cg1 tr1 s21 4 1.6254200 ghz -25.753 db cg1 tr1 s21 5 1.5254200 ghz 0.8703 db cg1 tr1 s21 6 1.6754200 ghz -15.542 db cg1 tr1 s21 7 1.4754200 ghz -5.0099 db 60.00 50.00 40.00 30.00 20.00 10.00 0.000 -10.00 -20.00 -30.00 -40.00 >1 1.5754200 ghz 26.079 db 2 1 3 5 7 4 1 active ch/trace 2 response 3 stimulus 4 mkr/analysis 5 instr state spe-12-8-004/b/ss |
page 5 of 11 4. lna noise figure @3.0v 5. total specifcation (through antenna, lna, cable and connector) parameter specifcation frequency 1575.42 1.023mhz gain at 3v: 15 4dbic @ 90 output impedance 50 polarization rhcp output vswr max 2.0 operation temperature -40c to + 85c storage temperature -40c to + 85c relative humidity 40% to 95% input voltage min. 1.8v, typ. 3.0v, max. 5.5v antenna 10*10*4mm 1 40.00 gain scale/ 5.000 db -10.00 mkr1 1.5754 ghz 2.559 db 26.755 db center 1.57542 ghz bw 4 mhz points 11 span 3.00 mhz tcold 296.50 k avgs off att 0/ - - db loss off corr 9.000 nfig scale/ 1.000 db -1.000 1 spe-12-8-004/b/ss |
-8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 page 6 of 11 6. radiation patterns 6.1 xz plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10f.07.0039b xz 1624.00 -9.27 / 163.26 -13.80 / 68.02 -11.23 rhcp 2010/4/29 spe-12-8-004/b/ss |
-8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 page 7 of 11 6.2 yz plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10f.07.0039b yz 1624.00 -12.30 / 352.00 -29.55 / 216.00 -16.23 rhcp 2010/4/29 spe-12-8-004/b/ss |
-8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 page 8 of 11 6.3 xy plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10f.07.0039b xz 1624.00 -9.27 / 163.26 -13.80 / 68.02 -11.23 rhcp 2010/4/29 2 ap.10f.07.0039b yz 1624.00 -12.30 / 352.00 -29.55 / 216.00 -16.23 rhcp 2010/4/29 spe-12-8-004/b/ss |
page 9 of 11 7. antenna drawing this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre name material finish qty ap.10f patch(10*10*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 0.81 coaxial cable ipex mhf1 1 4 tin plated tin (spte) shielding case 1 5 green fr4 0.5t pcb "a" note: 1.soldered area 2.shielding case area 3. all material must be rohs compliant. 4. the connector orientation has a fixed position to the antenna as per drawing. ipex mhf 1 a all initial design kiwi 2011/9/6 top side bottom p/n ap.10f od.081.cm ipex.mhfi.113 ap.10f b e2 add logo sandy 2011/11/21 b name p/n material finish qty note: 1. 2. 3. . 4. the connector orientation has a fxed this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre name material finish qty ap.10f patch(10*10*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 0.81 coaxial cable ipex mhf1 1 4 tin plated tin (spte) shielding case 1 5 green fr4 0.5t pcb "a" note: 1.soldered area 2.shielding case area 3. all material must be rohs compliant. 4. the connector orientation has a fixed position to the antenna as per drawing. ipex mhf 1 a all initial design kiwi 2011/9/6 top side bottom p/n ap.10f od.081.cm ipex.mhfi.113 ap.10f b e2 add logo sandy 2011/11/21 b this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre name material finish qty ap.10f patch(10*10*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 0.81 coaxial cable ipex mhf1 1 4 tin plated tin (spte) shielding case 1 5 green fr4 0.5t pcb "a" note: 1.soldered area 2.shielding case area 3. all material must be rohs compliant. 4. the connector orientation has a fixed position to the antenna as per drawing. ipex mhf 1 a all initial design kiwi 2011/9/6 top side bottom p/n ap.10f od.081.cm ipex.mhfi.113 ap.10f b e2 add logo sandy 2011/11/21 b spe-12-8-004/b/ss |
page 10 of 11 8. plugs usage precautions (1) to disconnect connectors, insert the end portion of i-pex under the connector fanges and pull off vertically, in the direc - tion of the connector mating axis. (2) to mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. the click will confrm fully mated connection. do not attempt to insert on an extreme angle. after the connectors are mated, do not apply a load to the cable in excess of the values indicated in the diagram below. 8.1 mating / unmating 8.2 pull forces on the cable after connectors are mated 2 1 coaxial cable plug pulling tool p/n : 90192-001 receptacle plug rece 2n max. 2n max. 4n max. coaxial cable spe-12-8-004/b/ss |
page 11 of 11 9. packaging taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to nblfdibohftuptfdmdbupotboe product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third parties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd. spe-12-8-004/b/ss |

▲Up To Search▲

Price & Availability of AP10F070039B

	To Download AP10F070039B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .